$ sudo apt update & sudo apt dist-upgrade $ ssh Add the armhf architecture as it is required by most projects Connect to the ODROID via SSH (Change to your IP!) and follow the instructions.SSH is active per default with username root, password 1234.Connect to network via Ethernet or Wi-Fi using a static IP address ( How-To Wi-Fi).Boot up the ODROID, blue LED should flash up periodically.Plug the MicroSD card into the ODROID-C2.$ sudo dd if=Armbian_5.35_Odroidc2_Debian_jessie_default_3.14.79.img of=/dev/YourDevice bs=1M Write the image to your memory card ( Device name must be adjusted, of course! You can get the device name of your card by executing lsblk).$ 7z e Armbian_5.35_Odroidc2_Debian_jessie_default_3.14.79.7z Write to MicroSD card Download the server image for the C2 from the following URL:.The server version does not contain any desktop environment, so no resources are going to be wasted for things we do not need anyway. I recommend the lightweight Armbian GNU/Linux distribution for use as BOINC crunching device. If you are using another operating system, you have to use alternative methods. In this How-To we use a GNU/Linux host system to write the disk image to the storage media of the ODROID. This is a step-by-step Tutorial on how you can use your ODROID-C2 as a dedicated BOINC cruncher.Ĭheck the BOINC project list to find BOINC projects that support Linux on the ARM platform. # systemctl enable the service or restart the machine to check if everything works.Ģ016 ODROID-C2 Dedicated Linux BOINC Cruncher How-To Install ifplugd and enable the service for your interface.Enable the eth0 profile so it will be loaded on system startup.“SkipNoCarrier” automatically applies the settings as soon as the ethernet cable is plugged in. The “ForceConnect” option is used to circumvent any problems on startup. The following lines are needed for our example configuration. Change to the netctl directory and copy the example file for static ethernet configuration.In this How-To we will use “eth0″ as adapter name.Ĭhange it to your needs in the next steps! Usually the name is “eth0″ or something like “enp2s0f1″. Obtain a root shell on the ArchLinux machineĮxecute the following command and write down the name of the ethernet adapter.This step-by-step tutorial shows you how to set up your ethernet adapter using the following settings: 2018 HowTo Configure a static ethernet connection in ArchLinuxĪssigning a static ip address to your ArchLinux box can be quite a struggle if you’ve never done it before.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |